Fitting the shell:
Involves two options to allow for custom shaping and fit:
- Groin Snap-Rise System: 4x size settings allowing parents to customise to a longer/shorter nappy and to provide a custom fit around thighs. (These snaps are situated in the lower section of the front of the nappy shell.)
- Waist-Size System: Double row of snaps situated at the top of the front of the nappy shell, to allow for a personalised fit to baby’s waist size. Overlapping closure feature also available.
Fitting Guide:
- Snap insert in to waterproof inner lining of shell
- For more absorbency (Overnight/Heavy wetters): Snap booster to the waterproof inner lining of the shell first, then snap the insert on top of the booster
- Lay baby on top of open nappy, ensuring back of nappy sits just at the top of baby’s bottom crack
- Pull front of nappy up much higher in belly than the back sits
- Adjust length of the nappy via groin Snap-Rise: (Situated lower section on front of shell – 4 options) Connect the snaps upwards to shorten nappy
- Use fingers to tuck the excess fabric upwards in between front groin rise snaps
- Bring side waist tabs up and around baby for a snug and secure fit around waist
- Pull leg gussets out around thighs, running a finger along the inside of the shell gussets and pull out the insert gussets so they sit within the shell gussets (This will ensure the insert is sitting flat and not bunched up inside nappy)
- Tuck the shell gusset elastic back in to baby’s underwear line to avoid discomfort
- Ensure no gaps around back or thighs, and ensure two fingers width at the front top panel so there is some space for when baby is sitting up
- Nappy changes: Snap out soiled insert and snap clean one in. (Shells are completely waterproof and wipe-able to ensure multiple-use before washing, however you may choose to spray and wipe down/air-dry/wash between use.)
